KX-TDE 600E Specifications |
| Control Bus |
Original Bus (16-bit, 8MHz, 10 megabytes per second) |
| Communication Bus |
H.100 bus conformity (1024 time slots) |
| Switching |
Distributed Switching |
| Power Input |
PSU-M |
100V AC to 130V AC; 2.5 A/200V AC to 240V AC; 1.4 A/50 Hz/60Hz |
| PSU-L |
100V AC to 130 V AC; 5.1 A/200 V AC to 240V AC; 2.55 A/50 Hz/60Hz |
| External Battery |
+36V DC (+12V DC x 3 recommended maximum capacity per shelf is 28 Ah) |
| Maximum Power Failure Tolerance |
300ms (without using backup batteries) |
| Memory Backup Duration |
7 years |
| Dialling |
Trunk |
Dial Pulse (DP) 10pps, 20pps Tone (DTMF) Dialling |
| Extension |
Dial Pulse (DP) 10pps, 20pps Tone (DTMF) Dialling |
| Mode Conversion |
DP-DTMF, DTMF-DP |
| Ring Frequency |
20 Hz/25 Hz (Selectable) |
| Trunk Loop Limit |
1600 Ω max. |
| Operating Environment |
Temperature |
0ºC to 40ºC |
| Humidity |
10% to 90% (non-condensing) |
| Conference Call Trunk (per shelf) |
From 10 x 3-party conference call to 4 x 8 party conference call |
| Music on Hold(MOH): |
2 ports (Level Control:-11dB to +11 dB in 1 dB steps) |
| MOH1: External Music Source Port |
| MOH2: Selectable Internal/External Music Source port |
| Paging |
Internal: |
Level Control:-15dB to +6dB in 3 dB steps |
| External: |
2 ports (Volume Cotrol:-15dB to +15dB in 1 dB steps |
| Serial Interface Port: |
RS-232C |
1 (maximum 115.2kbps) |
| RJ45 Port |
MNT Port |
1 (for PC Connection) |
| LAN Port |
1 (for LAN Connection) |
| Extension Connection Cable: |
SLT |
1-pair wire (T,R) |
| DPT |
1 pair wire (D1,D2) or 2-pair wire(T,R, D1,D2) |
| APT |
2 pair wire (T,R,D1, D2) |
| PT-Interface CS(2-channel) |
1 pair wire (D1,D2) |
| PT-Interface CS(8-channel) |
4 pair wire (D1,D2) |
| DSS Console and Add-on Key Module |
1 pair wire (D1,D2) |
| Dimension |
Basic Shelf |
430mm (W) x 415mm (H) x270mm (D) |
| Expansion Shelf |
430mm (W) x 415mm (H) x270mm (D) |
| Weight (When fully mounted): |
Basic Shelf |
Under 16 kg |
| Expansion Shelf |
Under 16 kg |